Guitar Nut Lubricant: Why I Recommend PTFE

When a guitar or bass will not stay in tune, I check for friction at the nut. Guitar nut lubricant containing PTFE can help reduce string binding in the slots. If a string catches, you may hear a small ping while tuning or find the pitch changes after a bend or using a vibrato. I recommend a tiny amount of Guitar Glide in the nut slots.

Guitar Glide PTFE lubricant recommended for guitar and bass nut slots
Guitar Glide lubricant with PTFE, applied sparingly to guitar and bass nut slots.

Why use guitar nut lubricant?

The string needs to move smoothly through the nut slot as you tune, bend notes or use a vibrato. Friction can make a string stick, then release suddenly, leaving it out of tune. A purpose-made lubricant containing PTFE helps reduce friction at that contact point, so the string can glide more freely. It can help with tuning stability when nut friction is the cause.

Why this is my recommendation

I like using a lubricant made for guitar string contact points because I can apply a very small amount exactly where it is needed. The PTFE in this product helps the string move through the slot with less resistance. A little goes a long way; the aim is to lubricate the slot, not fill it with grease.

It is useful on guitars and basses, especially when a player hears strings ping while tuning or has tuning trouble after bends. I apply it during a string change or when checking a setup, then tune the instrument and check that each string moves and returns smoothly.

How I apply it

I loosen the string enough to reach the slot, apply a tiny amount with a suitable applicator, then bring the string back to pitch and check its movement. I wipe away any excess. It should be used sparingly and kept on the nut slot rather than spread over the fingerboard or finish.

Lubricant cannot fix every nut problem

If a slot is too narrow, too shallow, poorly shaped or worn, lubricant may only help temporarily. The nut may need careful slotting, polishing or replacement. Tuning issues can also come from the bridge, string winding, machine heads or strings that have not been stretched in. I check the whole setup before recommending a repair.

If your guitar or bass is sticking, pinging or struggling to stay in tune, I can inspect the nut and setup at RG Guitar Tech in Nottingham, Kimberley or Ilkeston. I will explain what is causing the problem and agree the work with you before I start.